Kpi counters

was specially registered forum tell..

Kpi counters

We recommend that you run monitor performance primarily in a test environment. The recommended collection interval is 30 seconds. You can use the Performance Monitor counters that are included with Microsoft Dynamics AX to help monitor the usage of system resources.

kpi counters

By using counters, you can collect and view real-time performance data about server resources, such as processor and memory use, and about Microsoft Dynamics AX and Microsoft SQL Server resources, such as locks and transactions. You can use standard service and endpoint performance counters to monitor the performance of the Microsoft Dynamics AX services. All Enterprise Portal counters are. NET Business Connector counters.

If you call. NET Business Connector through another application, the same counters can be used. For Enterprise Portal, a fatal session exception indicates that the page was not displayed.

Nct google drive

Instead, a Windows SharePoint Services error page was displayed to the user. For Enterprise Portal, a nonfatal session exception indicates that the page was displayed, but some Web Parts on the page were not displayed. The total number of.

Open the Performance window. In the navigation tree of the Performance window, expand Performance Logs and Alerts. On the General tab of the dialog box for the new alert, add a comment, and then click Add to add a counter to the alert.

Then, in the Select counters from list, select a counter. Repeat steps 5 and 6 to add more counters to the alert. When you have finished adding counters, click Close to return to the dialog box for the new alert. In the dialog box for the new alert, in the Alert when the value is list, select either Over or Under. Then, in the Limit box, enter a threshold value. The alert is generated when the value for the counter is more than or less than the threshold value, depending on whether you selected Over or Under.

kpi counters

On the Action tab, set the actions that occur every time that the alert is triggered. You may also leave feedback directly on GitHub. Skip to main content. Exit focus mode. Counter Description Active Sessions The number of currently active server sessions.Many of the activities involved in the daily operation and future network planning of an E-UTRAN require data on which decisions are based.

This data refers to the load carried by the network and the grade of service offered that can be measured by eNBs in the form of diverse types of counters.

E-UTRAN/LTE Counters & KPIs

The course is intended for experienced network engineers responsible for E-UTRAN network evaluation, planning and optimization. Due to the settings of your browser and in order to improve the functioning of the website, we use cookies. By continuing to browse the site without changing the cookies settings you are agreeing to use them which means that cookies will be placed on your end device. You can change it in your browsers settings. Training offer. Target audience The course is intended for experienced network engineers responsible for E-UTRAN network evaluation, planning and optimization.

Training method Lecture Duration 1 day Level Advanced. Training Description. Leliwa Sp. Learn more in Cookies policy.Key performance indicators KPIs are like milestones on the road to online retail success. Monitoring them will help ecommerce entrepreneurs identify progress toward sales, marketing, and customer service goals.

KPIs should be chosen and monitored depending on your unique business goals. Here is the definition of key performance indicators, types of key performance indicators, and 67 examples of ecommerce key performance indicators.

Turn more website visitors into customers by getting a crash course in conversion optimization.

LTE KPI Optimization Deep Dive: RRC Success Rate

Access our free, curated list of high-impact articles below. We'll also send you updates on new educational guides and success stories from the Shopify newsletter. We hate SPAM and promise to keep your email address safe. Get started. Relative to this goal, a performance indicator might be the number of unique visitors the site receives daily or which traffic sources send visitors paid advertising, search engine optimization, brand or display advertising, a YouTube video, etc.

For most goals there could be many performance indicators — often too many — so often people narrow it down to just two or three impactful data points known as key performance indicators. KPIs are those measurements that most accurately and succinctly show whether or not a business in progressing toward its goal. KPIs are important just like strategy and goal setting are important. KPIs tell you more information about your business and your customers, so you can make informed and strategic decisions.

What is a KPI?

The real value lies in the actionable insights you take away from analyzing the data. Plus, the data related to KPIs can be distributed to the larger team.

This can be used to educate your employees and come together for critical problem-solving. A service level agreement in ecommerce establishes the scope for the working relationship between an online retailer and a vendor.

For example, you might have a SLA with your manufacturer or digital marketing agency. A KPI, as we know, is a metric or data point related to some business operation. These are often quantifiable, but KPIs may also be qualitative. There are many types of key performance indicators. They may be qualitative, quantitative, predictive of the future, or revealing of the past.

KPIs also touch on various business operations. When it comes to ecommerce, KPIs generally fall into one of the following five categories:. Note: The performance indicators listed below are in no way an exhaustive list. There are an almost infinite number of KPIs to consider for your ecommerce business. Sales key performance indicators are measures that tell you how your business is doing in terms of conversions and revenue.

You can look at sales KPIs related to a specific channel, time period, team, employee, etc. These also impact your sales KPIs. This can help you market more strategically in the future and inform product development. You can track your ecommerce marketing analytics in Google Analytics or using Shopify's built-in analytics tools. You might be wondering: what should the KPIs be in our call center, for our email support team, for our social media support team, etc. Key performance indicators for manufacturing are, predictably, related to your supply chain and production processes.To browse Academia.

Skip to main content. Log In Sign Up. Prashant Gupta. Each part has a little introduction and then lists the information, with a little description and formulas or default values.

Be aware that each network can have a different setting, and the default values are not necessarily the best or the recommended setting by Ericsson. Old name: schPower1 secondarySchPower Threshold used for addition- window in evaluation criteria for event type 1a. Threshold used for dropwindow in evaluation criteria for event 1b. Hysteresis used in replacement threshold in evaluation criteria for event 1c to avoid ping pong effects. Hysteresis used in dropwindow in evaluation criteria for event type 1d.

This offset is added to the measured quantity before the UE evaluates if an event has occurred. This attribute also controls the reporting deactivation threshold, used to control intra-frequency measurements event 1a. The attribute also controls the replacement activation threshold, used to control intra-frequency measurements event 1c.

This value should always be less than or equal to the value of downswitchTimerThreshold. If this parameter is set to 0, the packet part of the connection will not be released due to PS inactivity. The value seconds is used only for testing purposes. Default setting is to disable the admission policy. This parameter is also used together with beMarginUlHw for non-handover non-guaranteed admission requests.

This parameter is also used together with beMarginDlHw for non-handover non-guaranteed admission requests. Default setting is to avoid false DL cell congestion detection. Default setting is to disable UL congestion measurements, in order to prevent problems during upgrading. Default setting is to disable UL congestion measurements, in order to prevent problems during upgrading releaseAseDl 1 Amount of ASE in DL to be released with each periodic congestion resolve action targeting guaranteed traffic class connections in a cell.Congestion time counter for underlaid subcell.

Congestion time counter for signalling connection setup for procedures requiring a TCH. Starts incrementing when a signalling connection setup attempt for a procedure requiring a TCH fails and stops incrementing when there is a successful signalling connection setup of any kind on a SDCCH or a TCH. Congestion time counter for signalling connection setup for procedures that can be completed on a SDCCH. Starts incrementing when a signalling connection setup attempt for a procedure that can be completed on an SDCCH fails and stops incrementing when there is a successful signalling connection setup of any kind on a SDCCH.

Number of released TCH signalling connections due to transcoder resource congestion during immediate assignment on TCH.

Rpg maker mv on screen buttons

Number of failed channel allocation attempts at assignment or immediate assignment in underlaid subcell. The counter is also available for half-rate and for overlaid subcells, e. Number of congestion at incoming handover in underlaid subcell. Soft congestion time counter for underlaid subcell.

The counter starts to increment when a channel is requested but no idle channels are available. Hard congestion time counter for underlaid subcell. The counter starts to increment only when it has not been possible to allocate a channel with the help of any type of preemption. Dropped SDCCH connection during location area update at low signal strength on down or uplink in underlaid subcell i.

Dropped SDCCH connection during location area update at bad quality down or uplink per cell in underlaid subcell i. Learn more about Scribd Membership Home. Read Free For 30 Days. Much more than documents. Discover everything Scribd has to offer, including books and audiobooks from major publishers. Start Free Trial Cancel anytime. Ericsson KPI Counters. Uploaded by pankajjangra4.

Document Information click to expand document information Date uploaded Jan 07, Did you find this document useful?If you are following all the tutorials, you've seen that we can represent our network through geo-referencing tools such as Mapinfo and Google Earth, and also that with this kind of tools we can perform tasks such as analysis of drive tests. But there are other important ways to evaluate a network, one, probably the main one, is through the analysis of statistics, and this is what we'll start seeing today.

Yes, start, because the analysis of statistics is a very broad activity, with numerous forms to be performed. The possibilities are very diverse: different data sources, processing, storage, analysis algorithms, output reports and graphs and so on. And it is very important to say that the professional that dominates the analysis of statistics has guaranteed its success, and differing much from those who do not have that capacity.

So what are we waiting for? Lets get it and learn. Note: All telecomHall articles are originally written in Portuguese. Following we translate to English and Spanish.

As our time is short, maybe you find some typos sometimes we just use the automatic translator, with only a final and 'quick' review. We apologize and we have an understanding of our effort. The purpose of today's tutorial is to present an introduction to network analysis through the use of indicators and statistics.

Lok avatar

These tests, as already mentioned briefly, are very broad, and can be as diverse and complex as we wish. For this reason, we will not get through to you all at once. And even if we tried, certainly would not have the desired result. We want you to learn above all, so we will do an introduction, a bit more theoretical, with the key concepts involved in statistical analysis. Not really going to stop practicing, even with the creation of a simple application. So understand this tutorial essential as a general preparation for other modules that Hunter will address specifically analysis of indicators.

As the concepts involved are many, will talk briefly about them, trying to give an overview. As we speak, this may be one of its best qualities as a professional, so enjoy each topic presented today.

Random qr code

Why not take the time to go releasing their creativity: as reading, think about the ways of how you would do the same procedures. Remember that Hunter is always improvements, and their input will make a system more intelligent and efficient. Note: In the vast majority of the tutorials have the related files, which are sent to the Subscribers.Sampled every 20 seconds. Along with above counter Timer expires while waiting for assignment complete Unsuccessful handover, timer expires Unsuccessful TCH activation, timer expires while waiting for Channel Activation Ack message.

TCH assignment failure. Description Average number of the busy TCHs. The average value is calculated by dividing the value of this counter by the value of the next counter. This is effected by low coverage, poor quality, high interference over Air interface Number of TCH transactions ended due to a radio failure on the source channel during a handover attempt.

Number of TCH transactions ended due to a failure in the Abis interface during a call in progress. When a TCH transaction ends due to signalling problems in the Abis interface. The signalling problems may include missing acknowledgement of channel activation, missing indication of call establishment, receipt of an error indication, corrupted messages, missing measurement results from the BTS, excessive timing advance or some internal reasons.

These failures can also contains situations when the timer T expires in a BSC in call release phase while waiting for the Release Indication. The MS subscriber does not see these failures caused by the T expiry as real drop calls. Number of TCH transactions ended due to a failure in the A interface during a call in progress. Number of TCH transactions ended due to a failure in the A interface on the source channel during a handover attempt.

It is this counter in the source cell that is updated.

KPI Counters Cause Description

If the target cell lies within the same BSC, also counter in the target cell is updated along with this counter. This also cause Handover failure. Number of TCH transactions that are ended due to user actions.

kpi counters

Number of TCH transactions ended due to a reconfiguration of the radio network. The TRX blocked is in sub-state blocked by the system.

Number of TCH transactions that are ended due to a failure to activate a channel during a call attempt. HO drop Which BTSs have problems?

What causes? How the suspected BTS has performed? It processes the measurements and decides on the handover algorithm. If thresholds have been triggered for the handover, the BSC generates a candidate target cell list and starts the handover attempt. If candidate list is not generated for some reason then HO is not attempted. HO success Handover complete message is the triggering point for the successful handover counters. Learn more about Scribd Membership Home. Read Free For 30 Days. Much more than documents.


Kazirn

thoughts on “Kpi counters

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top